Rod or Tweezers holder for Leatherman Super Tool 300.

This listing is for one rod type or tweezers of your choosing. You will receive one holder and your choice of insert. Due to different diameters of the inserts, I do not recommend swapping different inserts in the same holder, as the holder may conform to fit the thicker insert, causing the others to be loose.

The Super Tool 300 can hold up to a total of 4 of these add-ons simultaneously, one under each of the long tools. There are two types of holders - one for under the blades, and one for under the saw or file (they are mirrored and fit on one side or the other).

Insert Options:

2 Ferro Rods

1 Pen

1 Scribe

1 Tweezers

Replacement pens and ferro rods are available on my website kristenvanpatten.com

The plastic holder magnetically adheres to the frame under the longer tools for a very secure attachment. To remove it, simply open the tool covering it and pull out the insert.

The ferro rod is coated with a black paint to prevent corrosion. You will need to scrape through the paint layer before it will spark. It is recommended to use the spine of the saw or the awl to scrape the ferro rod.

These pieces are designed and 3D printed by myself.